
Add to Cart
Constant Pressure Water Supply Variable Frequency Drive Pump Control 1.5KW
When the water supply automatic control system works, the equipment detects the pressure change of the water supply pipe network when the water consumption changes through the high-sensitivity pressure sensor installed on the water supply pipe network. When the pressure transmitter pressure is maximum, the inverter frequency is the lowest, the pump motor The lowest speed, when the pressure of the pressure transmitter is the smallest, the inverter frequency is the highest, the pump motor speed is the highest, and the frequency of the inverter changes with the change of water consumption.
After the microcomputer judges the calculation and compares it with the set pressure, it sends a command to change the frequency to the controller. The controller changes the speed of the pump motor and the number of enabled pumps by changing the frequency, automatically adjusting the peak and valley water consumption, and ensuring that the water supply pipe network pressure is constant
Model | Motor | Rated Input Current (A) | Rated Output Current (A) | |
KW | HP | |||
3AC 380V±15% | ||||
KD386-00150T4 | 1.5 | 2 | 5 | 4.4 |
3AC 220V±15% | ||||
KD386-00150T2 | 1.5 | 2 | 9.5 | 7 |
1AC 220V±15% | ||||
KD386-00150S2 | 1.5 | 2 | 14 | 7 |
| Easy installation |
1 | Mounted on the pump directly, without additionla cabinet. |
2 | Modbus communication, very less wiring connection. |
3 | Multiple pumps system, only two pressure sensor is necessary. |
| Easy operation |
1 | Few parameters setting. |
2 | Press-to-go, fully automatic running. |
3 | Pressure setting can be changed easily. |
| Smart master-slave control |
1 | Master inverter and slave inverter can be operated alternately, prolong the pump's life time. |
2 | Pumps are switched smoothly, no pressure vibration. |
3 | Pumps are increased / decreased automatically, alwasy keep constant pressure. |